The corn harvester is a new type of agricultural machinery that is researched and developed for the development of new energy sources and reducing the labor intensity of farmers' friends. It is an agricultural machine that is inexpensive and suitable for the popularization of small four rounds in rural areas. Products with complex structures, high technological content, and strict requirements for manufacturing processes play a pivotal role in contemporary agricultural production.
Taizy Machinery is a professional corn harvester manufacturer. Based on many years of research and development and manufacturing experience, it has summarized the main points of corn harvester shutdown maintenance. Now share with you:
First, the dirt, broken rods, grains and other debris inside and outside the machine should be thoroughly cleaned, and dried in the hangar and parked.
2. Remove all the belts, scrub them, apply talcum powder, fasten the labels, and hang them on the wall of the hangar for storage. Remove the chain, put it in diesel (or kerosene), clean it, dry it, and soak it in engine oil for about half an hour to take it out. Then coat it with kraft paper and store it in a dry and ventilated place.
3. Carefully inspect each part, and find that the parts are excessively worn, deformed, and damaged, and should be replaced in time; it is found that the welding and riveting parts have desoldering and cracks, etc.
4. Lubricate each part strictly according to the machine's lubrication chart and oil requirements. If necessary, replace the chassis, gearbox, hydraulic oil, etc. And apply oil or butter to the rubbed parts during machine work, and make up the paint when the paint is dropped.
5. Minimize the cutting head of the corn harvester and use square wooden pads. Drain the water from the engine and drain the fuel and oil from the sump. Wrap the air filter, exhaust pipe port, fuel tank filler port, etc. with a plastic cloth, fill an appropriate amount of engine oil into the cylinder, and rotate the crankshaft a few turns. Remove the battery for separate storage.