troubleshoot (22)

Simple Ways For Troubleshooting The McAfee Error Code 0

McAfee is a reliable antivirus company that provides the best antivirus products. Their units give excellent security from the cyber world, which is home to some of the most malicious viruses and malware that can destroy your computer. Mcafee, however, stops this from occurring as its shield gives your systems complete protection to avoid these situations. Sometimes the users face issues related to, which can be resolved quickly. One example of such error is the error code 0, which you can effectively troubleshoot with the guidelines provided below.

Running the tool named preinstall

  • You can resolve this error by launching the tool known as pre-install; this can be done by downloading the tool from the web and then once downloaded, you can locate them by navigating to the folder where your downloaded files are stored.
  • Click on the setup and install it onto your system and then launch the tool. Upon doing this tool will fix the issues that result in the error code 0. After this, you can check if the error has disappeared or not.

Running the disk clean up tool

  • The cluttering of the disk files can degrade the performance of your system, which can result in error code 0. You can fix this by downloading the tool named disk clean up. This will clear the excess of files that are no longer relevant. You can install the tool and click on the tab of start clean up.
  • This procedure will take a couple of minutes before it finishes, when it is done you can click on the fic all tab to get rid of the useless files, after this you can check if the error code 0 has been resolved.
  • You can also delete the temporary files that are not of relevant use to your system. You can start by clicking n the start tab and then type the command of %temp%. After this step, hit the enter key and select all the files that appear, then delete these unnecessary files.

The error code 0 associated with can be fixed by following the instructions given above.

James Hopes is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cyber security, malware, social engineering, Games, internet and new media. He writes for


Read more…


In earlier days, printing a document is one of the most difficult tasks that everyone can ever be done. But Brother builds it possible for everyone and makes life simple and easy by providing various advanced features and amazing performance. Moreover, while using the Brother Printer various issues are there. The Error TS-02 is one of the ordinary error which may occur when the WLAN or router access point which cannot be genuine with the address of the Mac. Generally, the Brother Printer error code TS-02 specifies that the WLAN access point or the router cannot be easily recognized by the computer system. Reasons of Brother Printer TS-02 Error Code There are multiple reasons behind the occurrence of this Brother Printer Error Code TS-02. Here are some most common reasons which may trigger the error code TS-02. The steps are discussed below: Windows system files damage. Due to damaged or corrupted system files entries. Due to incorrect or incomplete installation and un-installation of the Brother printer. Incorrect removal of hardware or applications straight from the device. Steps To Troubleshoot Brother Printer Error Code TS-02:- Step 1:- Check WLAN Access Router/Point Ensure that the WLAN access router/point is powered on properly. Step 2:- Join the Internet Then try to attach to the Internet via using a PC with a built-in wireless LAN in order to check the WLAN access router/point works appropriately. In case, you are not able to attach to the Internet, then your WLAN access router may not work accurately. Step 3:- Move Your Brother Printer Move your Printer closer to the WLAN access router/point or to blockages free are. You can temporarily put your Brother Printer within the WLAN access point while you are configuring the wireless settings. Step 4:- Network Configuration If your WLAN access router/point is using MAC address filtering, then you should check the MAC address of the Brother printer is allowable in the filter. You can determine the MAC address through printing the Network Configuration List. Step 5:- Usage of the Setup Wizard from the Control Panel You may alert that your Brother Printer uses radio signals in the 2.4 GHz range. Step 6:- Reconfirm the SSID Often the info may be incorrect when you manually submitted the security information and SSID. Connect the Brother Printer Customer Support Phone Number Contact us at Brother Printer Customer Support Phone Number to instantly make a connection with our team of Brother Customer support professional in order to get online assistance. The trained and talented customer support specialists will help you to resolve this error by giving comprehensive guidance. Hence, dial our toll-free number which is obtainable 24×7 for your help or determines Brother related queries. John Rise is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cyber security, malware, social engineering, Games,internet and new media. He writes for Printer support at Brother printer support. Source:

Read more…

Troubleshoot HP Printer Error 0xc19a0003


 Is your printer displaying HP Printer Error 0xc19a0003? Are you receiving an Ink System Failure error message followed by an alphanumeric code and you are questioning how to manually resolve the issue? Well, as the name suggests, Ink System Failure 0xc19a0003 is a print heads or an Ink System Failure issue that can occur if the ink cartridge is not supplying enough ink to the print heads.

Some simple steps to manually troubleshoot the issue

By following our DIY steps, you can easily resolve the issue, in case you need skilled and expertise helps. Dial our toll-free HP printer customer support number and seek quick help from our certified technicians who can resolve the error code in no time and help you get going.

Troubleshoot HP Printer Error 0xc19a0003

Step 1: Unplug USB cord and remove cartridges

  • Switch ON the power of the printer.
  • Unplug the USB cord from the back side.
  • Now, open the top and remove the cartridges carefully.
  • Close the lid and wait for the pop-up message from the Control Panel asking to insert the cartridges.
  • Now, run the printers to check whether it’s printing or not.

Step 2:  Test with power-cycle method

  • Remove the power cord and also unplug it from the wall outlet.
  • Wait for some time.
  • Go ahead and reconnect the power cord and turn the printer ON.
  • Run a test print.

Step 3:  Reset the printer

  • Switch ON the printer
  • Wait, until it turns silent
  • Eliminate the power cord from the rear end of the device
  • Remove the power cord from the wall outlet
  • Wait for at least 60 seconds
  • HP wants the power cord connecting the printer directly to the wall outlet
  • Plug in the rear power cord
  • Switch the printer ON if it fails to turn ON automatically
  • Wait until and unless the printer is silent
  • Run a test print to check

Step 4: Uninstall and reinstall the drive

You can also find useful online videos showing steps to uninstall and reinstall the drive along with resetting the printer of the said model.

Contact HP Printer Helpline Number

While these steps should help you to fix HP Printer Error 0xc19a0003 with Print head. You should also check your ink cartridges to make sure that sufficient ink is being supplied to the print head. In case if you are not able to resolve an issue on your own, give us a call. Dial our HP printer helpline number …………………… and get instant resolution.

John Rise is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cyber security, malware, social engineering, Games, internet and new media. He writes for printer support at printer customer support or HP Printer Support.


Read more…


Ink System Failure is one of the error messages that are exhibited on the printer control panel or on the device. In some cases the printer would not be able to print.

Steps to fix hp printer error 61011bed

Step 1: Use HP ink cartridges genuine

We should always use toner supplies or genuine ink. HP cannot offer any guarantee regarding other refilled or Non-HP cartridges. In case if you do not use the genuine HP cartridges then this might not be of any help to you. However, if you want to check the faithfulness of the website then look at our website.

Step 2: Reset the HP printer

Follow the steps given to reset the HP printer error

  • Switch on the printer if it is not ready.
  • Wait until the printer is idle.
  • When the printer turned on, disconnect the power cord from the rear of the printer.
  • Unplug the power cord from the wall outlet.
  • Wait for 60 seconds and Plug the power cord back in to the wall outlet.

Step 3: Remove the ink cartridges

Removing the ink cartridges while checking for any kind of error message shall diagnose the issue of the printer. Take out the ink cartridges from the print head and then check the control panel of the printer or device for any kind of error message. Follow the steps given below:

  • Open the ink cartridge access door.
  • The cartridge shall move to the left side of the access area.
  • Wait for the cartridge tube silent or idle and Push on the front of the ink cartridge to release it back and then pull the ink cartridge towards you to remove it.
  • Repeat the same steps for the ink cartridge.
  • Close the ink cartridge access door.

Step 4: Clean the ink cartridges and check the error message

For this you would need to gather the following materials:

  • A clean dry cotton swab
  • A clean lint free cloth
  • Distilled or bottled water
  • Do not use tap water as it might damage the print head.
  • Dampen the cloth lightly with the water
  • Gently wipe the copper coloured contact on one of the inns cartridges.
  • Wipe it off with a dry lint free cloth before proceeding to the next step.
  • Repeat the steps for the other cartridges too.
  • Carefully, put it back into the set and then push the cartridge forward until it clicks back into the right place.
  • Ensure each coloured dot on the ink cartridge cable matches its coloured dot on the print carriage.

Step 5: Update the printer firmware

  • You might receive an error if the printer firmware is outdated.
  • Download the firmware update from the HP website and then install it on your printer.
  • If these steps were not enough to solve your issue then follow the next steps:

Step 6: Service the printer

If the issue still persists then feel free to contact at HP Printer Customer Support number for help. Contact the HP to service the printer.

John Rise is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cyber security, malware, social engineering, Games,internet and new media. He writes for Printer support at HP printer support.


Read more…


Canon is one of the leading electronics brands, which provides multiple advanced features to the individual. It also gives a wide number of electronic products such as photocopiers, computer printers, camcorders, cameras, etc. Canon Printer Error Code 6000 states that there is an error with the Line Feed.  Line Feed is one of the techniques that move the print head down one line. This error persists when the Line Feed is messy or dirty.

Causes of Canon Printer Error Code 6000

The scanners and printers of Canon are made by using highly advanced technology. But being an electronic device it is quite important to face the error at any point of time. Canon printer error code 6000 is faced usually by the individuals.

  • When the feed tray of printer is blocked the error persists.
  • When the tray is not properly placed in the printer.
  • The sensor unit is line feed slit or defective.
  • When the printer command is simultaneously given.
  • When documents in bulk quantity are surrounding your printer.
  • Probability that Line feed is scratched or smeared.

Steps to Resolve Canon Printer Error Code 6000

Restarting or Resetting the Canon printer will help you to resolve the error. Some steps are given below that can help an individual to solve the issue

  • Reconnect your printer from a power source and for some seconds remain it same.
  • Attach the printer to the power source and turn it on.
  • For some seconds press and hold the power button for few seconds.
  • Repeat this process for at least two times.
  • After that release the power button very carefully.
  • Press the stop button at least four times.

Online Customer Support of Canon Printer

The above-listed steps are easy to perform and in case, by following the steps the issue is not resolved and the error still persists. Don’t get worried; Feel free to get in touch with us through the Live Chat. In Live Chat our executives will reply to your messages and solve your Canon printer problem within no time. 

John Rise is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cyber security, malware, social engineering, Games, internet and new media. He writes for printer support at printer customer support or Canon Printer Support.

Read more…


The Brother Printer error code implements while printing documents in the Windows 7OS. While this error implements, the individuals will come across a numeric message as Error code: 2147500037. Here the home group password section may get affected, so it is crucial to saving it somewhere in a proper document file. If we interpret the error message then, it says that the Windows 7 is unable to print this document for you because it needs a browser which should be the Internet Explorer and it’s by default.

Steps to resolve Brother Printer Error 2147500037

Step 1: Change the default browser

  • Go to the start button and type the default programs in the search bar.
  • Select the Default Programs from the list and click on it
  • Now, have a click on the icon of Set your default programs to select it and then have a click on the Internet Explorer.
  • Choose the option of Set this program as default icon and have a click on it and press the OK button

Step 2: Printing phase

  • To print, select the option of Set your default programs icons and then, click on the browser like Internet Explorer, Google Chrome, etc.
  • Individuals are request to choose the option of Set this program as the default icon.

Step 3: Set to default mode

  • After choosing the Default programs, Choose the option of Setting your default programs icon.
  • Click on the icon of Internet Explorer.
  • Choose the option of favorite browser and then have a click on the Set this program as default.

Contact us at Brother Printer Support Phone Number for immediate results to issues

Call our experts at Brother Printer Customer Support Phone number to bring world-class support solutions for all your problems. We are available all day long to bring the optimized answer while making sure that the same error is not faced again. We are having a team of highly skilled experts or technicians who are available all day/night for the help of the customers. We are available 365 days or 24*7 for the help of the customers.

Alexander Paul is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cyber security, malware, social engineering, Games,internet and new media. He writes for Printer support at Brother printer support.


Read more…

How to troubleshoot McAfee Error 2503?

McAfee is one of the foremost security software products across the globe. With the most advanced security system, McAfee undertakes a secure and threat free system for their individuals. The main aim of the Antivirus tool is to offer better protection from threats. The error code encounter with the McAfee error 2503 where their system freezes for some seconds and an error message is displayed on the screen of PC without any warning. Individuals have reported that they are facing an issue to resolve the error.

How can you detect an Error code 2503?

The signs that this error is corrupting or damaging your device. So take care of the following points and prefer a specialized for immediate fixes.

  • The system freezes sometimes.
  • A pop-up message displays on the screen of the device
  • Software windows go through frequent crashes.

Methods to eliminate the McAfee error 2503

Some of the procedures are listed below to fix your error. Check if these resolutions help you out. You can straightaway reach us for the issue to be fixed as soon as possible.

Method 1 : Scan the device

Run a scan on your device with a third party anti-malware tool. An antivirus tool is really a handy device as it scans and thereby detects the malware and viruses from your device. After implementing the scan, restart your device and see whether your issue got solved or not.

Method 2: Update the Software

Make sure your McAfee application is in effect with its newest version. If not, then promote it with the latest version immediately. If your device consists of any out-of-date beta version then you might face the Error code 2503 as well.

Contact the highly expert McAfee Antivirus Support here

You can get our tech support in multiple ways. Our highly skilled technical experts are active 24×7 for serving you with reliable and quick support at any time of the day. In case, if our contact numbers are unreachable avail our email supports. Just drop us an email along with your issues and our experts will get back to you soon with effective solutions. We also opt for the option of Live Chat option for our clients.

Kaylee Smith is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cybersecurity, malware, social engineering, Games,internet and new media. He writes for mcafee products at  or . 


Read more…


For individuals across the Globe are open to a large array of Canon Printer to have any of their choices. A good number of them are at top popularity charts when it comes in choosing the printer and accessories with the purpose of being filled at the office or at home work space. The best part about ink cartridge and Canon printer problem is that when more often than not they can troubleshoot under the guidance of technicians at Canon Printer Technical Support Number which is the toll-free number and is available for individuals 24*7. All of the Canon Printer common error to get them resolved to call on the number or drop an email to customer support email id or have chat with technicians.

Technical issues resolved with our support services

Canon Printer Jam Issues: Out of all the most frustrating issues printing jam in the printer is paper jam and the individual comes across with. Various other explanations for printer getting jam, accumulation of dirt could be one of the reasons.

Canon Printer no Print: When a command for print is given and paper just go inside the printer and comes out the same as it is. Absolutely with no print, the reason could be empty ink cartridge, may be clogging of cartridge head. Another reason is that in such issues the printer will display an error message, which will tell you exactly what has gone wrong. You can address the issues accordingly.

Canon Printer Driver Issue: Another common error is for driver error. The pop-up message arrives on the display of the individual saying can’t find the driver for Operating System. Issues keep revolving around the Operating system as a new driver for the existing printer.Canon Ink Cartridge problem: With no doubt, the individual replacing their empty ink cartridges with brand new cartridges is an expensive process. Therefore, many individuals choose to refill old cartridges or buy refurbished cartridges. The issue lies in the fact that a Canon printer that you are using might not recognize cartridge of a different manufacturer or the refurbished cartridge. When you put in third party ink or cartridge, the manufacturer’s warranty is not monitored. You cannot demand a maintenance service in case of issues. Therefore to avoid such issue, ensure that you use only Canon compatible cartridges in your printer.

Alexander Paul is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cyber security, malware, social engineering, Games, internet and new media. He writes for Printer support at Canon Printer customer support & Canon Printer Support.


Read more…


Have you ever come across a printer error code while using your Brother multifunction printer? Probabilities are that you have. It is not that the Brother printer is a poorer machine; in fact, it is one of the pre-eminent multifunction printers. But just like any machine, it can swamp down. And when it does, a printer error code might pop up on the LCD control panel or on your computer display of the printer.

What are the common printer error codes of Brother multifunction printers and how can we resolve them?

Here is a list of these error codes.

Error Code S05: A printer error code like this happens when the transfer of data via the parallel port is not going easily. Just reset your printer to start it again.

Error Code E50: This printer error code sparkles when the fuser unit of your Brother multifunction printer gets corrupted or damaged. When this occurs, it is a signal that you must replace your printer’s fuser unit.

Error Code E51: When the printer’s lid or mirrors, laser beam are not placed in their appropriate positions, it results in this printer error code. Please check whether ink cartridges and everything in your printer are there, then it should be before you start using it again.

Black pages: Sometimes, the message Black pages can flash on the display, or a black page is actually being printed out. In this case, you would need to take your printer to a service center and replace its diodes and jumper wires.

Check paper path: When this message shows up, it means that your Brother printer has a misaligned or dirty eject roller. Clean it or straighten it up, whichever is necessary, and then try printing it again.Poor quality of copy: When the output of your Brother multifunction printer, be it the fax or the printout, is smudgy, it could be because the scanning mirrors or the glass is dirty. Clean them up if they are. However, if these are clean, then the issue could be your printer’s camera. You can try out unplugging your printer for a few hours, but if the issue persists, you may have to go to a Brother Printer Customer Support service center to get your printer’s camera replaced.

Alexander Paul is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cyber security, malware, social engineering, Games,internet and new media. He writes for Printer support at Brother printer support.


Read more…

TP-link is the best router for connecting your device from the internet which is easily available in the market. The TP-link is the Chinese company manufacturing computer networking based products and sell them across the globe. It was first launched in the year 1996 by two Chinese brothers. The company started its first international expansion in the year 2005.

How to Troubleshoot TP-Link Router

However, the Tp-link products consist of wireless routers, mobile phones, ADSL, DSLR, routers, switches and many more. Therefore, due to the variety of products it is popular among the users and most demanded router to connect with the internet. Though, it is not always flawless and shows some technical errors which users can’t be able to solve. However, one such error is TP-Link router error code 5008. But this error code is quite common and encounters by lots of TP-Link users.

Nevertheless, the TP-Link router error code 5008 is commonly caused by incorrectly, or wrong configured system settings, or it might occur due to uneven entries in the Windows registry. Therefore, the TP-Link router error code 5008 is the letter and number formatting of the error, and it is most commonly utilize error format which employed by the Microsoft Windows and many other Windows compatible software application. Underneath we mentioned some troubleshooting steps for TP-Link error code 5008 without creating any problem or glitches.

Causes of TP-Link Router Error Code 5008

 This TP-Link error code 5008 occurred on the screen when there was any malfunction in the system operation. There are several other causes behind the occurrence of error code 5008 such as wrong or failed installation, uninstallation of software that might have left some invalid entries in the Windows registry, virus or malware infection spread on the computer system, due to improper system shutdown or due to some power failure or includes many other reasons.

Solutions to Troubleshoot TP-Link Router Error Code 5008

Before start following the process, remember that steps might be little tricky or time-consuming but if you follow these steps in the ascending order will save lots of time and efforts. Here how to do it:

Manual Fix for TP-Link Router Error Code 5008

  1. Firstly, click on the ‘Log in’ tab to log in as an admin.
  2. Then, press the ‘Get Started’ tab.
  3. Tap on ‘All Programs’ option.
  4. In the All Programs section, click on the ‘Accessories’ option.
  5. Now, tap on the ‘System Tools’ option.
  6. Under the ‘System Tools’ click on the ‘System Restore’ option.
  7. After that, in the new screen, choose the ‘Restore my machine to an earlier date.’
  8. Once clicked, press the ‘Next’ tab to proceed further.
  9. Next, choose the newest restore date within the ‘Click a Restore Point’ listing.
  10. Once done, again click on the ‘Next’ tab for going further.
  11. Press the ‘Next’ tab appears in the verification window.
  12. Finally, restart your computer system to apply all the changes.

Automatic Fix for TP-Link Router Error Code 5008

  1. Initially, download and install the TP-Link Router Error Code 5008 repair tool on your system.
  2. Click on the ‘Install’ tab to successfully install the repair tool in the system.
  3. Press the ‘Scan’ tab to perform a full system scan.
  4. Once the repair tool identifies the problem, press the ‘Fix Error’ tab to fix the error.
  5. At last, reboot your computer system.
Eleanor  is a jack of all trades : an experienced IT technicians, writer, researcher, and a self-professed Software expert. As a single software engineer, she has in-depth knowledge of Webroot Antivirus  and she likes to write tutorials, reviews, news, and reports about the same under webroot support
Read more…

How to troubleshoot HP Printer Error 57.xx?

HP is a provider of various devices which help the individuals and assist the users in their daily work. There are various advantages of the devices provided bythe organization and while using the device, it can happen that the individuals might face some kind of issue in the device which can hamper the work.

HP provides a variety of devices such as a printer, laptop, PC, scanner and much more. HP is known to offer a series of powerful and unique printers which helps them in carrying out their work in the daily routine. While using the device, it can happen that the individuals might face HP Printer Error 57.xx which can create many problems in the printer and it can also damage the internal features of the device.

It is significant for the individuals to perform the activity with proper guidance so that the issue can be resolved very easily and it can also help the individuals to use all the features which assist the individuals in the process to Fix HP Printer Error 57.xx.  We suggest individuals follow all the given steps in a proper way so that they can continue with the process and can also continue working with the device in a proper manner.

Some Facts of Hp Printer Error 57.xx                   

Here are the points that would help you know which kind of error you are facing in your HP Printer. Once you understand what errors or issues your printer is facing, you can start with the steps to solve that error.

  • When a printer error persists i.e. 57.01, it means cartridge fan error is being faced.
  • In times of 57.03, it is an error of the power supply fan.
  • While facing 57.04, you must be facing a controller fan error.
  • While 57.05, you can recognize that it is the delivery fan error.
  • If your printer shows 57.06, it means face-down bin error is moving your device.
  • In 57.07, you need to check the delivery fan.
  • If the device shows 57.08, it is an indication for duplexer fan error.

There are some of the numbers and errors that would help you to understand what are the exact issue faced in the printer. Once you are ensure about the error, you can jump to solving that error by following the steps which have been listed below.

Steps for HP Printer Error Code 57.xx Solution

  • To start with the process to fix HP Printer Error 57.xx, you need to ensure that the connector on the dc controller is firmly seated.
  • After that, you need to ensure that the connector on the intermediate connector and dc controller are firmly seated.
  • After that, you must ensure that the connector on the dc controller is firmly seated.
  • Now, you must check the connectors at the rear or front fan.
  • You also need to ensure that the fan blades can move freely.
  • After that, you must listen for the fans to operate while the device is modifying.
  • In case, the fan does not operate during the initialization sequence, you must replace it.
  • You can also go with changing the entire duplexer assembly for a failed duplexer fan.

So, these are some of the steps that would help the individuals in the process and they would also offer you with HP Printer Error Code 57.xx Solution. All the steps are unique and they also provide complete solutions for the problems and issues related to the 57.xx errors. If by following the above-given steps the error is not resolved, then feel free to contact HP printer customer support number.

Alexander Paul is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cybersecurity, malware, social engineering, Games,internet and new media. He writes for Printer support at HP Printer Support.

Source: 3819321833?profile=original

Read more…

If the error 1935 persists during the installation of assembly component when you install Office 2007 or 2010, one of the Office stand-alone products like Ms office, Excel, restart the PC and try to run the setup again as a quick first step. If the error still appears after restarting the system, try these methods to troubleshoot the issue.

Run the System Update Readiness tool

Repair or update Microsoft .NET Framework components

Firstly, Install the programs and check whether the latest version of the .NET Framework is installed. To do this, the steps are hereby described below:

  • Click on Start > Run in Windows XP
  • Type appwiz.cpl, and then have a click on Enter.
  • Look for Microsoft .NET Framework in the list of installed programs.

If you find Microsoft .NET Framework for the Profile of client, follow these steps to repair it:

  • Close all the applications.
  • Click on Start > Run in Windows XP.
  • Type appwiz.cpl, and then press Enter.
  • Click on Microsoft .NET Framework and then Remove/change or Uninstall/Change in Windows XP.
  • Select the option to Repair .NET Framework to its original state, and then click on Next.
  • When the repair is complete, then click on Finish, and then click on Restart Now to restart the PC.

If you can’t find Microsoft .NET Framework, download and install it to update the PC.

Try to install the Microsoft Office. If error 1935 persists, then follow the steps to uninstall and reinstall .NET Framework from the device.

Uninstall and reinstall Microsoft .NET Framework components

Uninstall and reinstall Microsoft .NET Framework components. To uninstall .NET Framework components from the device follow these steps:

  • Create a junk and temporary folder on your desktop.
  • Visit the .NET framework clean-up tool and download the file.
  • When encouraged, click on Open, and then on Extract Now. Extract the files to the folder which you created.
  • Find cleanup_tool.exe in the folder you created and have double-clicked on it.
  • Do you want to run the .NET Framework Setup Clean-up Utility? Click on Yes.
  • Click on Yes to accept the license agreement.
  • In the Product to clean-up window, select a .NET Framework version that you want to remove.
  • Click on the option of Clean-up now.
  • Restart the device once the .NET Framework component is removed.
  • Download and install the following components, at a time, based on your operating system:
  • .Net Framework 1.1 – For Windows XP.
  • .Net Framework 1.1 SPI– For Windows XP only.
  • .Net Framework 3.5 SPI – For Windows XP, Windows Vista, and Windows 7.
  • .Net Framework 4.0 – For Windows Vista, Windows XP, and Windows
  • Restart the device, and run Windows Update to install updates.

If By following above steps, you are not able to resolve the error. Feel free to contact MS office Customer Support.

Kaylee Smith is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cybersecurity, malware, social engineering, Games,internet and new media. He writes for Ms-Office products at  or .


Read more…

Generally, the motive behind compressing the file is to make them convenient and smaller in sizes. Well, there are multiples of file extensions available over the internet which is specially used for compressing the files such as as.Zip, .rar, .7z, and many others. However, file compression does not only reduces the file size but also, makes sending and receiving much easier. Although to compress and decompress particular files, users need to take some advantage of particular programs which is only created for these purposes such as WinRar, WinZip, 7Zip are the most known name among all.  But due to some reasons, many users are facing ‘Zipped Folder Invalid Error’ which stops users from easily archiving or opening a compressed file.


Though, there are various reason behind the Zipped Folder error pops-up on the screen. For instances, whenever the file might be compressed poorly or canceled by the user before the process was completed, the tool might be malfunctioning, the file might even consist of some malware inside. To troubleshoot the Zipped Folder error, one may need to follow the steps which are discussed below:

Steps to Troubleshoot Zipped Folder Invalid Error

Before you continuing with the process, remember that if you follow the steps in the same sequence as mentioned will save lots of time and takes fewer efforts. Here how to do it:

Method-1: Perform a File Scan

The malware creates lots of problems for the users; it might steal all your confidential information, lock up your files, record keystrokes and creates a variety of errors. However, Zip, .rar files are typically known for spreading malware infections. Though, to scan the file, you need to download any security application like as ‘Reimage’ and perform complete scanning of your device.

Method-2: Temporarily Turn Off Windows Firewall

Many times, security applications or integrated tool might be a reason behind Zipped Folder Invalid Error. So, to troubleshoot the error, we suggest you turn off the Windows Defender Firewall or some other programs that might create a problem in launching an archived folder. In order to disable the Firewall, you need to follow below-given steps which are as follows:

  1. Firstly, under the ‘Cortana’s’ search box, type the following command ‘ Firewall.cpl’ and press the ‘Enter’ key.
  2. Choose ‘Enable or Disable Windows Firewall’ option.
  3. Inside the ‘private Network Settings’ choose ‘Turn off Windows Firewall’ option.
  4. For ‘Public Network Settings,’ you have to repeat the above-mentioned steps.
  5. Press ‘OK’ tab for completing the steps.

Method-3: Extract Package into Temp Folder

 To extract the package into the Temp folder, you need to follow few simple steps. But few compressed files might consist of path structures which many times exceeded the Windows limit to 260 characters. As a result, you may face Zipped Folder Invalid error. Follow the below given steps:

  1. Type ‘%Temp%’ under the ‘Run’ command box.
  2. Press the ‘Enter’ key.
  3. Drag and drop the archived file into the ‘Temp’ folder.
  4. Then, right press on the file and choose ‘Extract to..’

Becky Losby is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cyber security, cryptography, malware, social engineering, internet and new media. He writes for Norton security products at

source : Troubleshoot

Read more…

Error Code b504 is a warning error that displays on Canon Printers. If this error is disturbing you as well, place a call at Canon Printer Customer Support NumberThe issue is within the printer, not within the ink cartridges. And you can simply troubleshoot Canon Printer Error Code b504. This error code b504 is built-in security in Canon. It does not let the delicate devices in the print head to self-destruct and overheat. When the ink stops to flow within the print head, you can no longer keep it cool. The time comes when the ink flow stops completely and the print head becomes dry completely. The print head makes a default print as you insert a new cartridge. This is corporate for genuine OEM cartridges.

Steps to Fix Canon Printer Error Code b504

This is one kind of an issue that asks for an instant fix. If this error code does not stop looking, you may face serious issues with your print head. This blog will help you to resolve this issue in no time.

  • The First thing which you need to do is to Switch the printer off and disconnect all the power cables.
  • Next, you need to open the front cover to move the print cart manually.
  • If the print cart is not movable, Switch on the printer after plugging back the cables, and then unplug it again to shift it to a movable position.
  • Now identify the cartridge for which you are looking to change. Place your index finger on it and click on the fastener.
  • The cartridge will eject as soon as you hear a click. You can modify all other cartridges in the same manner as well.
  • As soon as you are done with the replacement process, close the front printer cover.
  • Restart your printer after plugging it back.

These steps will definitely work as a miracle to fix this harmful error in no time.

Hurry! Contact Us at Canon Printer Customer Number

As soon as you understand this error, we are ready to contribute you in every possible way. Whether to chat, email or online, you can use our different modes of communication. Canon printer customer Support is available 24*7 to offer a complete solution. We take no time to help you out in serious circumstances. Hence, dial the Canon Printer Support toll-free number to resolve all Canon error and free yourself from all serious Canon printer issues.


Read more…

How To Troubleshoot Xbox One Update Issues

Are you facing problem while updating Xbox One? If yes, you should surely go through this blog carefully as it will offer you major tips that can help you to do update.


Solutions for the Xbox One update errors

  1. Update Xbox One offline

The offline update should be done whenever the Xbox One cannot get updated because of problems related to network connection and corrupted files.

  • Create space in the drive

Whenever you receive an error message that says the Xbox One does not have any storage space, creating space on the hard drive solves this issue quickly.

  • Prefer factory reset

You should only go for factory reset after trying all the other ways because while this can solve the problem of update but at the same time also deletes locally saved files.

Perform a restart and full power cycle

  1. Firstly, use the Directional Pad on the controller to choose Restart this Xbox.
  2. Then, click a button on your controller with selecting Restart this Xbox chosen.
  3. After that, give some time to the console to restart, check whether the update is completed.
  4. Check your update and if it is taking a lot of time, prefer shutting down your Xbox.
  5. Next, remove the plug of the Xbox from power after switching it off and wait for a minimum half minute.
  6. Then, plug in your Xbox and switch it on.
  7. Look out that the update is finished or not.
  8. Lastly, if still now your updates did not been able to get over, then you require to reset the Xbox one.

3. Go through the Xbox One network connection

         The method of checking the Xbox One network connection is given below-

  1. Firstly, click on the Xbox button on the controller.
  2. Then click on System.
  3. After that, press on Settings.
  4. Next, click on Network.
  5. Press on Network settings.
  6. Click on Test network connection.
  7. If the Xbox One faces any issue related to the network connection or by the servers, then it will be shown to you on the screen itself.
  8. If shown any problem related to the network connection, try to solve it out.
  9. After that, update the console.

Note: Update Xbox One offline. It can also be done.

The method of solving ‘Your Xbox is almost full’ error of update

  1. Firstly, go to my games and apps.
  2. Then, have a look at the games that you don’t prefer playing.
  3. Choose the games that you would like to remove.
  4. Click on the option of the menu. The option of the menu will have the symbol of three horizontal lines on the Xbox One controller.
  5. Click on Manage game.
  6. Click on Uninstall.

Follow this procedure until you have made sufficient space to do the update fully.

Marshall Lyne is a Microsoft Office expert and her been working in the technical industry since 2002. As a technical expert, Sara has written technical blogs, manuals, white papers, and reviews for many websites such as


Read more…

Windows 10 is made in such a way that you can solve most of your queries on it easily with the help of a few clicks. But it gets very problematic when its search tool doesn’t work at all. Luckily, some fixes can make it work.

Reasons Behind Windows 10 Search Not Working Problem

How To Troubleshoot Windows 10 Search Not Working Issue

Updating to the latest version of Windows may lead to a problem with search.

There are situations where many people come across poor search results. This makes the search tool completely non-useful.

The top methods of solving Windows 10 Search issue

Restart your PC

An easy step of a reboot of the system can solve big issues in a few seconds. It is better to reboot the system rather than shutting it down.

Note: A shutdown can put your system into hibernation instead of switching it off.

Disable Cortana and then enable it

As Windows 10’s search tool is connected to Cortana, so turning it off and then on may solve your issues.

For doing it, follow the given below instructions.

  1. Firstly, do a right click on taskbar and press on Task Manager.
  2. Then, tap on Processes.
  3. Next, click on More Details.
  4. After that, go through the processes by Name by choosing a suitable option.
  5. Click on Cortana.
  6. Do a right click on Cortana.
  7. Lastly, press on End task.

Go to Windows Troubleshooter

  1. Firstly, go to the Windows 10 Settings menu by putting the combination of Control+I.
  2. Then, press on Update and security.
  3. After that, click on Troubleshoot.
  4. Next, press on Search and indexing.
  5. Click on the Run the troubleshooter option.
  6. Lastly, select according to your preference and press on Next. Observe that the troubleshooter has solved your issue.

Ensure that the search service is working

Sometimes the search service gets disabled by its own. To make it work you need to follow the given below instruction carefully.

  1. Firstly, put the combination of Window key+R to get the Run Window.
  2. After that, write ‘Services.msc.’
  3. Then, click on Enter.
  4. Look for Windows Search.  Note that if it enabled only then you need to do right-click on it and press on Restart. And if it is not running then do a right click on it and press on Start option.

For future purpose: If you want to ensure that this service will get started by its own as soon Windows starts working, then do follow the given below instructions.

  1. Firstly, do a right click on it.
  2. Click on Properties.
  3. Click on General option.
  4. Tap on Automatic.

Note: If any of the method mentioned above didn’t solve your problem, then I recommend you to do ‘full Windows reset.’

Jeniffer Leio is a Microsoft Office expert and has been working in the technical industry since 2002. As a technical expert, Jeniffer Leio written technical blogs, manuals, white papers, and reviews for many websites such as

Source: Windows 10

Read more…

How to Access a Remote Desktop?

If you think that setting up a computer system for your parents, but live far away, then you can do so remotely. The non- technical people get distressed when they encounter trivial issues. In case they are not able to find any email in their inbox, they feel anxious and call you to come and troubleshoot the problem. It will take a significant amount of time, so you need a tool through which you can control any remote system from your home. Chrome is facilitating the temporary control of any system if both of the parties have the Chrome web browser in their system. With the help of some simple steps, you can solve your the problem in another desktop without physically going there. This support is for Window, Mac OS and Linux operating system also.

access a remote desktop

How to control a remote desktop?

First of all, you have to install Google Chrome on both the device.  You can do so by connecting both the systems with the internet. Open the official Chrome website and download the Chrome web browser on both systems. Then go through the term and condition and install it on both systems. You can make it the default web browser of your system. It is also suggested to enable the Chrome extension on your browser.

You can do it through app also. First get the Chrome Remote desktop app from Chrome Web store. After downloading the app, install it on your system.

How to access other devices with Chrome app?

  • Go to the Chrome app.
  • It pops up a window with three options.
    • First is to share the current computer with other users. By it, any other user can see and control other permitted systems. Go to share to allow the access.
    • Second option state that view and handle a shared computer. With this option, you can see and control other computers.
    • The third option is asking to access your computer from any remote location. Go to Get started option.
  • Now go the first option on the system of your parent or any other to which you want to control from a remote location.
  • Press share option.
  • It asks to install a remote installer in that machine. It’s a one-time practice.
  • It will flash pop up with a code. Save the code for future concern. It is the entry pass to access the computer from anywhere.
  • Now click on the access button. It will give you the full control of the current system.
  • Signing in to your account and entering the 25 digits code can give you the full control of this system from anywhere.
  • As long as you are connected with this system, a small window remains at the main window screen of both systems. It notifies the host as well as the guest who is accessing it from the remote location about the remote access of the system.
  • If the browser remains idle sometime, then it pop-ups a timeout warning after that you will lose control from the host system.
  • To access this computer from the remote location, it is mandatory that your system might have Chrome app along with the third option setting on the browser that says “Access and controls your own computer from any location”.
  • Go to get shared option and press the button.
  • It will generate a Pin.
  • Now your PC is also set to use by any location.

Harry Williams is an inventive person who has been doing intensive research in particular topics and writing blogs and articles for AOI Tech Solutions on NortonWebrootMcAfeeMicrosoft Office and many other related topics. He is a very knowledgeable person with lots of experience. To get in touch with the internet security service provider, just dial 8888754666.


Read more…

How to Troubleshoot AutoFill not Working on Edge?

Many web browsers including the Microsoft Edge lets users to easily save their passwords and other sign-in credentials information usually for the sites you visited regularly. This feature called AutoFill, AutoComplete, or AutoSave. This feature helps users by easily fill the often used information or log-in credentials by just assembling it and auto-filling directly in the documents or wherever needed.

Auto-saved passwords are tremendously helpful when you are having lots of website or accounts, which needs signing up for performing activities like sending any mail to someone, want to do shopping and many more things you want to do. As we discern that technology is increasing day by day and in this technological world, we fulfilled with lots of advanced features. However, several people do not have the habit of writing down the important passwords or significant credentials, and not having in their mind that how many diverse passwords and log-ins passwords they may have, in these cases AutoFill may accumulate your day by reminding you or automatically typing in each password box just for you.

A few days back, many people have reported that the AutoFill feature is not working on Microsoft Edge. It is very irritating for the users to solve the piece of bug which might occur because of cache or false web browser’s settings. Here we will discuss how to troubleshoot this Edge AutoFilling bugs.

Fix to Troubleshoot Auto Fill not Working on Microsoft Edge Problem

We suggest you to execute a full system scan with an anti-malware program to make sure that your computer system doesn’t have file data issue or any other registry issues and it is not infected with the malware infections. We provide you with a few effective methods which surely helps you in troubleshooting the issue. Here how to do it:

Solution-1: Turn On AutoFill Feature on Edge

  1. Firstly, click on the ‘Microsoft Edge’ icon to open it.
  2. Hit the three dots located at the head right side of the screen to open the ‘More’ options.
  3. Choose ‘Settings’ option and click on it.
  4. Under settings, tap on the ‘View Advanced Settings, option.
  5. After that, launch the ‘Privacy’ tab and search for the ‘Save from entries’ option.
  6. Toggle a slider to ‘Turn On’ the ‘Save from Entries’.
  7. Note: if in case, any user wants to manage each password itself, turn off the ‘Save from Entries’ option.
  8. Inside the ‘Offer to Save passwords’ tab, click on the ‘Manage my saved passwords’ option just to open it.
  9. And to exclude a specific password from saving it, then move the slider labelled as ‘Offer to save the password’ located at the left panel of the screen.
  10. Once completed, exit the Microsoft Edge and wait for few seconds and again reopen it.

Hopefully, AutoFill feature should be working properly on your Microsoft Edge. If not, try the next method.

Solution-2: Delete Cached Files and Data

To troubleshoot this issue tries to remove all the cache data and files. Here how to do it:

  1. Open the Microsoft Edge on your computer system.
  2. Tap on the three dots appears on the screen to launch ‘More’ option on the screen.
  3. Choose ‘Settings’ option.
  4. Search for the ‘Clear browsing data’ option.
  5. Now, pick ‘choose what to clear’.

Look for ‘Cached files and Data and then choose these options to clear it permanently.

Enne garcia is a Microsoft Office expert and has been working in the technical industry since 2001. As a technical expert, Enne has written technical blogs, manuals, white papers, and reviews for many websites such as


Read more…

Are you encountering Error 0xc7700112 after upgrading from Windows 8.1 to Windows 10? Recently, we have found that many Windows users are suffering from this issue. Usually, this error code occurs when users run the Windows Update or Windows Update Assistant.


At times, while checking the C:\Windows10Upgrade\upgrader_default.log, you may encounter the message which says; Error Setup Platform Initialize failed with result 0xc7700112. This Windows 10 Upgrade Error Code 0xc7700112 simply means that the setup can’t persist as there are traces of a previous setup installation attempt within the Boot Configuration Data file. Therefore, in most cases, Users are using the media creation tool for updating Windows 10. Unluckily, it appears that this option often ends up with some errors.

To troubleshoot the Windows 10 Update Error Code 0xc7700112, you need to use the following steps. The steps are discussed before.

Steps to Fix Windows 10 Update Error Code 0xc7700112 

Before starting the process, make sure that you have to follow the instruction in the proper sequence to avoid troubles and damages. There are two ways which help you in fixing the error. Here how to do it:

Method-1 Create a USB Flash Drive

  1. Firstly, download the Media creation tool in your Windows system.
  2. After that, click on the tool to open it.
  3. If asked, click on the “I Agree” box to accept the “T&C.”
  4. Now, two options will appear on your screen which will be “Upgrade this PC” and “Create Installation Media for another PC. Here you should choose a second option.
  5. Additionally, choose “Language, Architecture, and Edition.”
  6. After it, choose between the “USB Flash Drive and ISO File.
  7. Next, click on the “USB Flash Drive” selection; plug in a USB which has minimum 8GB of free space.
  8. Lastly, tap on the “Drive” and hit “Next” tab.

Once done, now the Media Creation tool will download the Windows 10 Upgrade on USB easily, which you can now be used for upgrading the system.

Method-2: Download ISO File

  1. Download and install Media creation tool.
  2. After that, click on the Media Creation tool to launch it.
  3. If prompted, checkmark the “I Agree” box to accept all the “T&C” of the tool.
  4. In the next window, two options will be available which will be “Upgrade this PC” or “Download ISO.
  5. Now, opt for the second option, ISO File.
  6. Next, you should click on the selection and lets the download process to complete automatically.
  7. Then, plug it in the USB which have at least 8GB free space.
  8. Search the downloaded ISO file and right-click on the file, choose “Mount” option.
  9. Moreover, search for the “File Explorer” option located on the taskbar.
  10. Choose “Open CD Drive” option.
  • When you find a “Setup File,” just click on it twice and wait until the upgrade is successfully finished.
  1. Finally, restart your computer system to save the changes and smoothly run on your computer system.

Edward Lewis is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cyber security, cryptography, malware, social engineering, internet and new media. He writes for Norton security products at

Source :

Read more…

How to Troubleshoot Error Code 5010F on Mac?

enerally, the error code 5010F might occur on the screen whenever any user attempts to renew the Mac operating system. Though, reinstalling the operating system can be one of the best ways of troubleshooting various system glitches and bugs such as removing the stubborn malware or attempting to make your computer to run fast.

Recently, Apple created its newest Internet Recovery feature to help their users to fully reinstall the OS with the help of the internet connection. With the use of this feature, you are not required to download installation files or do something besides that could direct into troubles particularly for those users who are not aware of these tasks.

Though, when you are trying to reinstall the MacOS, it might be a possibility to encounter an error code 5010F which prevents you from installing and downloading the procedure. This error will also keep the user from accessing the utility menu.

Steps to Open Internet Recovery Feature

To open the Internet Recovery feature, you need to follow the below-given steps:

  1. Click and hold the Command +Option + R keys, immediately Mac it starts booting up.
  2. After that, the device launches the Internet Recovery mode and again starts downloading the preferred resources from the internet.
  3. When it all finished, OS X utility menu automatically appears on your screen
  4. And then, you can able to select the Reinstall OS X option direct from the menu.

This procedure above can be stopped by the Error code 5010F which may appear after clicking the needed combination on the screen. However, the error rejects the access to OS X menu and users are unable to reinstall the operating system on their computer systems. Below we describe some best ways to troubleshooting the error.

Steps to Troubleshoot Error Code 5010F on Mac

One of the most common causes behind this error code 5010F is that your Mac might be affected by the NVRAM. Mostly, this error can be troubleshooter by resetting the memory of the system OS. Also, the issue may appear on the screen because of the malware exist in your computer system which damaged your files and commenced the emergence of the error. We recommend you that you need to ensure that if there are no viruses on your system if you exist, scan your computer system with any anti-malware software. Here how to do it:

Solution-1: Resetting NVRAM on Mac

NVRAM stands for Non-volatile random-access memory. It is a section available on your Mac memory; It stores the information related to speaker volume, start-up disk selection, screen resolution, etc. For resetting the NVRAM, follow the below-given steps:

  1. Firstly, shut down the Mac, restart the device.
  2. Then, click and hold Option + Command + P +R keys together.
  3. Press the combination for at least a few
  4. After that, free the button whenever you hear the loading ring.
  5. Once done, you need to change your screen resolution, time zone information settings and some option if needed.

Source url:- 

Ava Williams is a McAfee product expert and has been working in the technology industry since 2002. As a technical expert, Emma has written technical blogs, manuals, white papers, and reviews for many websites such as

Read more…