error (251)


The Canon printer error code 1401 usually persists when the printer is not able to identify all or one the installed cartridges. These errors appear in the form of messages such as the Fine Cartridge isn’t installed properly or Fine Cartridge is not installed for 1401.  Even though many of the messages stating Canon fine cartridge doesn’t mean that a printer individual is using the exact cartridges of canon installed in the device. The printer individual can utilize the cartridges which are properly refilled. Therefore, some of the steps are described below to resolve canon printer error code 1401.

Steps to Resolve the Canon Printer Error Code 1401

Step 1: Ensure that you have installed Black and colored Cartridges Accurately 

The first thing you need to do is to turn on your printer and then take out the cartridges to ensure that each of them is installed in an exact way. In order to print the cartridges in an exact way, you should have both the colour and black cartridges.

Step 2: Look At the Cartridge Code of the Printer 

If you want to get rid of error then it is very important to properly install the cartridges. For the coloured printers, you also need to ensure that it is properly carrying the code of the machine. Moreover, the code accuracy depends upon the particular model of the printer.

Step 3: Clean the Contacts Correctly

It is very significant for printer contact to have a statement with the printer cartridge which is made up of metallic contacts. Printer contacts are placed on the band to the front of the cartridge. So, it becomes necessary for the individual to clean the parts that are damaged.

Step 4: Replace or Remove All the Ink Cartridges that are Faulty 

If you fail to identify the printer then in such case the cartridge is faulty and it has to be removed directly. Most probably your canon printer error code 1401 will get fixed after replacing the ink cartridges that are malfunctioning. Moreover, we will advise you to choose a canon original ink cartridge for replacing.

Step 5: Clean All the Contact Present Inside the Printer 

If an error still seems then the only thing you can do is to clean all the contacts that are present inside the printer. You have to clean them in a comparable way as you clean the cartridges contacts. But you should be careful while cleaning it doesn’t leave scraps of tissues on the contacts.

John Rise is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cyber security, malware, social engineering, Games, internet and new media. He writes for printer support at printer customer support or Canon Printer Support.


Read more…


Ink System Failure is one of the error messages that are exhibited on the printer control panel or on the device. In some cases the printer would not be able to print.

Steps to fix hp printer error 61011bed

Step 1: Use HP ink cartridges genuine

We should always use toner supplies or genuine ink. HP cannot offer any guarantee regarding other refilled or Non-HP cartridges. In case if you do not use the genuine HP cartridges then this might not be of any help to you. However, if you want to check the faithfulness of the website then look at our website.

Step 2: Reset the HP printer

Follow the steps given to reset the HP printer error

  • Switch on the printer if it is not ready.
  • Wait until the printer is idle.
  • When the printer turned on, disconnect the power cord from the rear of the printer.
  • Unplug the power cord from the wall outlet.
  • Wait for 60 seconds and Plug the power cord back in to the wall outlet.

Step 3: Remove the ink cartridges

Removing the ink cartridges while checking for any kind of error message shall diagnose the issue of the printer. Take out the ink cartridges from the print head and then check the control panel of the printer or device for any kind of error message. Follow the steps given below:

  • Open the ink cartridge access door.
  • The cartridge shall move to the left side of the access area.
  • Wait for the cartridge tube silent or idle and Push on the front of the ink cartridge to release it back and then pull the ink cartridge towards you to remove it.
  • Repeat the same steps for the ink cartridge.
  • Close the ink cartridge access door.

Step 4: Clean the ink cartridges and check the error message

For this you would need to gather the following materials:

  • A clean dry cotton swab
  • A clean lint free cloth
  • Distilled or bottled water
  • Do not use tap water as it might damage the print head.
  • Dampen the cloth lightly with the water
  • Gently wipe the copper coloured contact on one of the inns cartridges.
  • Wipe it off with a dry lint free cloth before proceeding to the next step.
  • Repeat the steps for the other cartridges too.
  • Carefully, put it back into the set and then push the cartridge forward until it clicks back into the right place.
  • Ensure each coloured dot on the ink cartridge cable matches its coloured dot on the print carriage.

Step 5: Update the printer firmware

  • You might receive an error if the printer firmware is outdated.
  • Download the firmware update from the HP website and then install it on your printer.
  • If these steps were not enough to solve your issue then follow the next steps:

Step 6: Service the printer

If the issue still persists then feel free to contact at HP Printer Customer Support number for help. Contact the HP to service the printer.

John Rise is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cyber security, malware, social engineering, Games,internet and new media. He writes for Printer support at HP printer support.


Read more…


The Brother Printer Unable to Print-4F Error specifies that you will not be able to print. This 4F error message is linked with the print head which simply indicates that your print head has an error or has an issue with the printer.

Causes of Brother Printer “Unable to Print-4F” Error

There are many causes of this Brother Printer error, but the most common is that remanufactured inks have blocked nozzles of the print head. This may happen when there is no ink available in the print head, and the resisters will start to head, and because of this it inclined to exhaust and overheat the printer that shows an error message.

It persists because of using the low-cost inks or low quality on your Brother printer. And many times, any object might jam in the device such as any ripped piece of papers, a paper clip, or due to mechanical malfunction it can throw an error message on your device.

Methods to Resolve Brother Printer ‘Unable to Print-4F’ Error

We are offering you with few effective methods to troubleshoot the Brother Printer Unable to Print-4F’ Error.

Method 1: Check the Warranty of Brother Printer

To resolve the Brother Printer Unable to Print-4F Error, first, you need to check the warranty of your brother printer; and if you have brought your printer before a year, then take advantage of the 1-year warranty, contact the company to get fix it or replace your printer with the newest one.

Method 2: Check the Brother Printer Manually

We acclaim you that you just check the Brother printer manually, as many printer models have a removable or replaceable print head. Thus, one of the easiest options is to purchase a new print head and replaced it with your old print head.

Method 3: Fix Temperature Error

Whenever your printer overheats or resisters, you have to give some time to cool down; this could help you in fixing the issue.

Here are the follow the steps.

  • Clear all the ink cartridges from your brother printer.
  • Unplug your printer from both device and power cord.
  • Leave your printer to cool down for at least 10-20 minutes.
  • At last, Replace or fill all inks in the printer.

If by following all the methods explained above the issue is not resolved. You can contact at our Brother Printer Support team for resolution. Our professionals are available 24*7 for the help of the customers.

John Rise  is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cyber security, malware, social engineering, Games,internet and new media. He writes for Printer support at Brother printer support.


Read more…

Steps to Fix Epson Printer Error Code W-41


While using the Epson printer with your device, if there is some error with your installation or ink cartridge of the new ink cartridge with it, you might familiar with the Error code W-41. This will be difficult to use as it would not let you get the print properly. So, the question arises how to resolve it; we have some tips for you to get rid.

Tips to Resolve Epson Printer Error Code W-41

Check Cartridges of your Epson Printer

The very first step is to check the ink cartridge of your Epson printer because an empty cartridge can lead to error code W-41 which you are getting. Along with this, try to figure out if the printer connectors and cartridge connectors are placed in the front of the head. The carbon or incorrect installation on these exteriors can create an error or issue. It should be clean in its entirety parts, which means that they do not have stains of ink or down that can stop the proper operation of printer and cartridge.

Check Slot of your Cartridges

When you installed an ink cartridge on your Epson printer, you have to make that all the cartridges are in the correct slot. In order to avoid any such issue, just follow the indication to insert the cartridges in a suitable way so it will get fitted properly in the correct slot.

Check the Compatibility of your Cartridges

We always acclaim using the branded and only Epson printer cartridge rather a well-suited one of refilling. Ensure that your Epson cartridges are well-suited with your Epson printer. Along with this, you need to ensure not to leave the printer without the ink cartridges for the longer time period as the ink may get dry on the print head which further creates an issue

Clean the Chip of Cartridge

You should try cleaning the cartridges with the help of a kitchen roll, cotton or proper cleaner. Clean the cartridge chip carefully and check that you don’t damage it else this will be another problem. Once you get the re-installation of the ink cartridge in your Epson printer then restart the printer, and this should definitely clear the error easily.

Contact us at Epson Printer Customer Support

If by following all the tips, the issue is not resolved. Don’t get worried, Feel free to Contact us at Epson Printer Customer Support. As we are having the team of highly skilled professionals who are available 24*7 or 365 days.

John Rise is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cyber security, malware, social engineering, Games, internet and new media. He writes for printer support at printer customer support or Epson Printer Support.


Read more…

Unable to print Brother Printer error code 48 occurs when the Brother print head cable is quite inconsistent. Brother Printer Customer Support toll-free number generally helps you to repair several issues of printer. You need to clean out the printer very carefully to solve the Brother Printer error code 48. This error code basically occurs when your strip of encoder gets very untidy. You may encounter a number of printing errors if the error is not fixed on time. You may also come across other error messages connected to this error code. Because of this error, you may get the following error messages as well:

  • Brother Printer Unable to Print 8f
  • Unable to Scan
  • Brother Printer Unable to Clean and many more printer functionality issues.

Most of the Brother Printers shows this error. No matter what ranges or shapes printer you are using, this error may worry you.

Effective Methods to resolve Brother Printer error 48

This is one of the most important error codes that you face on Brother Printer. But is this error worrying you from the core? Follow all the steps given below to resolve the error

Method 1: Brother Printer Paper Scraps or Paper Jam

  • Disconnect your Brother Printer.
  • Open up the scanner cover followed by looking inside the device.
  • Look for a piece of debris or paper jam inside the printer.
  • Make sure that the paper is not blocking the print head.
  • Move the printer to left or right to check for a piece of debris.
  • If the print head is already in the left side, move it to center.
  • And now have a look for the foreign objects inside there.
  • Close the scanner cover and put the power outlet back on the device.
  • Clear the encoder strip, if the error persists.
  • If the Print head is on the right side, put the power cord back on the printer.
  • When the LCD shows the Cover is Open, at that time press and hold the Exit button at least for 5 seconds.
  • As the print head moves back to middle, disconnect the power cable.
  • Remove the foreign objects that struck inside the printer.
  • Close the Scanner Cover and put back the power cables back to the wall outlet.
  • If the error continues, clean the encoder strip.

Method 2: Cleaning of the Encoder Strip

  • Eliminate all the power cables from the printer as well as from the wall outlet.
  • Lift up the Scanner Cover and look for the Encoder Strip.
  • Use a dry lint cloth to clean out both sides of the Encoder Strip
  • Clean it thoroughly from left to right and repeat the process again and again
  • As you are done with cleaning of the Encoder Strip, close the Scanner Cover.
  • Attach all the power cables back on the device and check for the error.

Contact us at Brother Printer Customer Support Service Toll-free Number for More Help:

If you are still having a problem while fixing this error, the best possible way to correct is to connect with Brother Printer Customer Support Service Number. With detailed solutions, the team of experts will help you resolve it at any minute. As soon as you place a call to our technicians, they will detect the error and provide the exact resolution as per your need. Hence dial the Brother Printer Customer Support Toll-free Number to free yourself from all stress and headaches.

John Rise is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cyber security, malware, social engineering, Games,internet and new media. He writes for Printer support at Printer Customer Support and Brother Printer Support.

Read more…

QuickBooks Error Code 80070057 arises while user tries to open/access the company file and a pop-up message occurs as ‘Parameter is Incorrect’. It also means that the QB user don’t have the permission to delete the QB company file.

You may see the following error message on your desktop screen:

Error: “80070057 the parameter is incorrect” and “You do not have sufficient permissions to delete files…”


In this post, we are providing you the best solutions to fix this error immediately.

Possible Cause behind Error 80070057

  • If the extensions of QB windows are incorrect such as .qbm, .qbb, .qbx
  • Damage or corrupt QuickBooks Installation.
  • Distorted QB Company files.
  • Improperly configured firewall.

How to Fix QuickBooks Error Code 80070057?

Check out the solutions shown below. However, if you seek professional help – you can get in touch with our QuickBooks Enterprise customer support team.

Solution 1: Check the QB Company file name extension

  • Perform right-click on the QB company file and choose “Properties”
  • Tap on the ‘QuickBooks’
  • In the filename section, notice the QB file extension & also QuickBooks last version.
  • Later, hit onto the “OK”


Solution 2: Perform QuickBooks Clean Installation


Solution 3: Rename the .nd file

  • First of all you need to open the folder.
  • Search the .nd file related of your company file.
  • Choose the Rename option and then hit a right-click on the .nd file.
  • Type .old at the end of the file name


Solution 4: Update QuickBooks to the latest release


The above-shown both the solutions are prompt to fix the QuickBooks Error 80070057. If you require quick & fast support – you can contact the QuickBooks certified experts at their toll-free number .i.e. 1-866-707-7925.


Few other resources:

Read more…


Hp printers provide the excellent features needed for printing quality. Despite offering useful features, it may face errors or problems. In many cases, the individual face problems like HP printer error code 0xc19a0003. It is a common issue of Ink system. There is a specific resolution to every error. You will get a suitable resolution for every problem.

Steps to resolve the error code 0xc19a0003 are given below

  • Restart your printer and when you restart the device, the problem can be solved easily. If this does not solve the error, try out the next step.
  • Here is the next method that you can try:
  • Switch on the printer and then eliminate the USB from the HP printer’s backside.
  • Open the external cover of your printer and take out the printer cartridges smoothly.
  • Now put the cover back to the printer.
  •  Wait for the option to insert cartridges and remove the cord and wait for some seconds.
  • Now, again attach the power cord to the HP printer. Ensure that it does not open automatically. Switch on your printer.
  • Now again open the external cover of the printer and insert the print cartridges into the printer for the clear functioning and close the outer covering of your printer.
  • Attach the USB to the printer and print any document and check if the problem persists.
  • Another method is to clean the printheads.
  • To clean the printheads from the toolbox, Go to the toolbox option. Click on the printer services option. Click on the option and follow the on-screen steps to clean it.
  • To clean the printheads from the HP inkjet, go to the Hp inkjet option.
  • Open it, and choose the clean option and follow the steps asked by the printer to complete the process.

Feel free to contact us at HP Printer Customer Support If your problem is not resolved and the error persists, then you can contact us at HP Printer Support. Even after that if the problem remains, reset the printer. If the error code 0xc19a0003 persists; calling an expert is necessary to troubleshoot.

John Rise is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cyber security, malware, social engineering, Games,internet and new media. He writes for Printer support at Printer Customer Support and HP Printer Support.


Read more…


Canon is one of the leading electronics brands, which provides multiple advanced features to the individual. It also gives a wide number of electronic products such as photocopiers, computer printers, camcorders, cameras, etc. Canon Printer Error Code 6000 states that there is an error with the Line Feed.  Line Feed is one of the techniques that move the print head down one line. This error persists when the Line Feed is messy or dirty.

Causes of Canon Printer Error Code 6000

The scanners and printers of Canon are made by using highly advanced technology. But being an electronic device it is quite important to face the error at any point of time. Canon printer error code 6000 is faced usually by the individuals.

  • When the feed tray of printer is blocked the error persists.
  • When the tray is not properly placed in the printer.
  • The sensor unit is line feed slit or defective.
  • When the printer command is simultaneously given.
  • When documents in bulk quantity are surrounding your printer.
  • Probability that Line feed is scratched or smeared.

Steps to Resolve Canon Printer Error Code 6000

Restarting or Resetting the Canon printer will help you to resolve the error. Some steps are given below that can help an individual to solve the issue

  • Reconnect your printer from a power source and for some seconds remain it same.
  • Attach the printer to the power source and turn it on.
  • For some seconds press and hold the power button for few seconds.
  • Repeat this process for at least two times.
  • After that release the power button very carefully.
  • Press the stop button at least four times.

Online Customer Support of Canon Printer

The above-listed steps are easy to perform and in case, by following the steps the issue is not resolved and the error still persists. Don’t get worried; Feel free to get in touch with us through the Live Chat. In Live Chat our executives will reply to your messages and solve your Canon printer problem within no time. 

John Rise is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cyber security, malware, social engineering, Games, internet and new media. He writes for printer support at printer customer support or Canon Printer Support.

Read more…


HP Envy Printer 4500 Error Code OXC4EB827F persists due to additional of damaged or corrupted registry entry in the device. Hp printer support team of technicians found the performance of the device much faster. This error is a perfect indication of a serious HP Envy printer fault which can be initiated by a paper jam, debris, damaged rails, or out of place purge assembly/wiper. Start-up problems with the HP Envy 4500 printer machine is somehow a difficult issue and it further gets individuals in a critical situation to resolve it because, knowing this actual issue with the device is not easy.

Here are the steps that you need to follow for resolving the HP Printer error code

Step 1: Firstly, Switch on your printer and fix the ink cartridge from it.

Step 2: Now, the next step is that you need to disconnect all the cables from the HP Printer. If there is a power module on the power cord, detach it.

Step 3: Shut down the device and Wi-Fi that is attached to your printer and wait for at least 30 seconds.

Step 4: Now, connect the cords back to their own place and turn on the device.

Step 4: In the next step, install the ink cartridges back to the printer.

Step 5: Make a copy of the backup and Switch on the printer as well as the wireless router too.

Step 6: Now, check the Printer and get whether the issue is resolved or not. You can do so by printing and photocopy a document and accord the other cables too.

Call us at HP Printer Support phone number

By following these steps, you can rapidly eliminate the HP Printer error code oxc4eb827f. But if in case you are unable to do so, don’t get worried. Our HP Printer customer support executives are available day/night for the help of individuals to resolve the issue. The other option is to contact our support executives via email, live chat, etc.

Alexander Paul is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cybersecurity, malware, social engineering, Games,internet and new media. He writes for Printer support at HP Printer Support.


Read more…


The Brother Printer error code implements while printing documents in the Windows 7OS. While this error implements, the individuals will come across a numeric message as Error code: 2147500037. Here the home group password section may get affected, so it is crucial to saving it somewhere in a proper document file. If we interpret the error message then, it says that the Windows 7 is unable to print this document for you because it needs a browser which should be the Internet Explorer and it’s by default.

Steps to resolve Brother Printer Error 2147500037

Step 1: Change the default browser

  • Go to the start button and type the default programs in the search bar.
  • Select the Default Programs from the list and click on it
  • Now, have a click on the icon of Set your default programs to select it and then have a click on the Internet Explorer.
  • Choose the option of Set this program as default icon and have a click on it and press the OK button

Step 2: Printing phase

  • To print, select the option of Set your default programs icons and then, click on the browser like Internet Explorer, Google Chrome, etc.
  • Individuals are request to choose the option of Set this program as the default icon.

Step 3: Set to default mode

  • After choosing the Default programs, Choose the option of Setting your default programs icon.
  • Click on the icon of Internet Explorer.
  • Choose the option of favorite browser and then have a click on the Set this program as default.

Contact us at Brother Printer Support Phone Number for immediate results to issues

Call our experts at Brother Printer Customer Support Phone number to bring world-class support solutions for all your problems. We are available all day long to bring the optimized answer while making sure that the same error is not faced again. We are having a team of highly skilled experts or technicians who are available all day/night for the help of the customers. We are available 365 days or 24*7 for the help of the customers.

Alexander Paul is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cyber security, malware, social engineering, Games,internet and new media. He writes for Printer support at Brother printer support.


Read more…

How to troubleshoot McAfee Error 2503?

McAfee is one of the foremost security software products across the globe. With the most advanced security system, McAfee undertakes a secure and threat free system for their individuals. The main aim of the Antivirus tool is to offer better protection from threats. The error code encounter with the McAfee error 2503 where their system freezes for some seconds and an error message is displayed on the screen of PC without any warning. Individuals have reported that they are facing an issue to resolve the error.

How can you detect an Error code 2503?

The signs that this error is corrupting or damaging your device. So take care of the following points and prefer a specialized for immediate fixes.

  • The system freezes sometimes.
  • A pop-up message displays on the screen of the device
  • Software windows go through frequent crashes.

Methods to eliminate the McAfee error 2503

Some of the procedures are listed below to fix your error. Check if these resolutions help you out. You can straightaway reach us for the issue to be fixed as soon as possible.

Method 1 : Scan the device

Run a scan on your device with a third party anti-malware tool. An antivirus tool is really a handy device as it scans and thereby detects the malware and viruses from your device. After implementing the scan, restart your device and see whether your issue got solved or not.

Method 2: Update the Software

Make sure your McAfee application is in effect with its newest version. If not, then promote it with the latest version immediately. If your device consists of any out-of-date beta version then you might face the Error code 2503 as well.

Contact the highly expert McAfee Antivirus Support here

You can get our tech support in multiple ways. Our highly skilled technical experts are active 24×7 for serving you with reliable and quick support at any time of the day. In case, if our contact numbers are unreachable avail our email supports. Just drop us an email along with your issues and our experts will get back to you soon with effective solutions. We also opt for the option of Live Chat option for our clients.

Kaylee Smith is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cybersecurity, malware, social engineering, Games,internet and new media. He writes for mcafee products at  or . 


Read more…


Have you ever come across a printer error code while using your Brother multifunction printer? Probabilities are that you have. It is not that the Brother printer is a poorer machine; in fact, it is one of the pre-eminent multifunction printers. But just like any machine, it can swamp down. And when it does, a printer error code might pop up on the LCD control panel or on your computer display of the printer.

What are the common printer error codes of Brother multifunction printers and how can we resolve them?

Here is a list of these error codes.

Error Code S05: A printer error code like this happens when the transfer of data via the parallel port is not going easily. Just reset your printer to start it again.

Error Code E50: This printer error code sparkles when the fuser unit of your Brother multifunction printer gets corrupted or damaged. When this occurs, it is a signal that you must replace your printer’s fuser unit.

Error Code E51: When the printer’s lid or mirrors, laser beam are not placed in their appropriate positions, it results in this printer error code. Please check whether ink cartridges and everything in your printer are there, then it should be before you start using it again.

Black pages: Sometimes, the message Black pages can flash on the display, or a black page is actually being printed out. In this case, you would need to take your printer to a service center and replace its diodes and jumper wires.

Check paper path: When this message shows up, it means that your Brother printer has a misaligned or dirty eject roller. Clean it or straighten it up, whichever is necessary, and then try printing it again.Poor quality of copy: When the output of your Brother multifunction printer, be it the fax or the printout, is smudgy, it could be because the scanning mirrors or the glass is dirty. Clean them up if they are. However, if these are clean, then the issue could be your printer’s camera. You can try out unplugging your printer for a few hours, but if the issue persists, you may have to go to a Brother Printer Customer Support service center to get your printer’s camera replaced.

Alexander Paul is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cyber security, malware, social engineering, Games,internet and new media. He writes for Printer support at Brother printer support.


Read more…

Epson is the leading brand for manufacturing top-notch printers with advanced printing technology. The company manufactures an array of printer models to deal with the needs of their clients like laser printer, office printer, inkjet printers, All-in-one printers, and many others. However, depending on your needs, one can easily get the best Epson printers at affordable prices. Epson printers provide fine printing quality prints with amazing printing speed. Being an electronic device, sometimes it can show some issues when users are working with it.

Get Simple Solutions to Resolve Epson Printer Error Code W-02

One most common issue is W-02 Epson printer error code, though, it’s a paper jam issue which occurs while taking prints from the Epson printers. Some other issues are like improper feeding of the paper into the device and paper is not ejected properly. The best solution of this Epson printer error code W-02 is that the paper used in your machine has become jammed in the printer and one may need to remove the stuck paper from the printer carefully. Generally, the issue occurs because of the paper jam in the external paper tray of the printer or paper jamming inside the printer.

Although to troubleshoot Epson printer error code W-02 users need to follow a few simple steps which are mentioned below.

Steps to Resolve Epson Printer Error Code W-02

Depending on your Epson printer model, you have to follow some simple steps which can easily troubleshoot the issue without creating any other issue. But before going with the process, we suggest you follow the steps in the correct sequence as mentioned below to prevent errors and unwanted troubles. Here how to do it:

Resolve “Paper Does Not Feed Correctly” Issue

  • If the paper is not situated correctly in the external paper tray of the printer, carefully remove it from the paper input tray.
  • Next, reload it against the right-hand side, right at the back of the tab.
  • Click on the tab which is placed on the left edge and move it against the paper.
  • If you placed several pages at once, remove the paper from the sheet feeder, and it is required to fan the edges to separate the sheet easily. Later on, Reload it.
  • We suggest you for smooth, high-quality prints placed certain amounts of papers.
  • Be cautious while loading paper on the printer. Do not place the paper with holes inside the printer for insertion in a binder.

Remove Out All Paper Jam

  • Smoothly drag out all the stuck or jammed paper from the output tray of the Epson printer.
  • Carefully ensure that the paper is jammed inside the printer or not and enable the Epson printer.
  • Elevate the scanner and carefully remove the stuck paper or any other foreign object by lowering out the scanner from the printer.
  • Finally, enable the printer again.

Aurora is an engineer by day and writer by night. Previously, Aurora worked as a certified technicians for a tech hardware startup. In her free time, she likes to write about printers, routers, web browsers, and other technical stuff. She majorly writes for Epson Printer Support , brother, lexmark printer etc.

Source: Epson Printer Error Code W-02

Read more…

TP-link is the best router for connecting your device from the internet which is easily available in the market. The TP-link is the Chinese company manufacturing computer networking based products and sell them across the globe. It was first launched in the year 1996 by two Chinese brothers. The company started its first international expansion in the year 2005.

How to Troubleshoot TP-Link Router

However, the Tp-link products consist of wireless routers, mobile phones, ADSL, DSLR, routers, switches and many more. Therefore, due to the variety of products it is popular among the users and most demanded router to connect with the internet. Though, it is not always flawless and shows some technical errors which users can’t be able to solve. However, one such error is TP-Link router error code 5008. But this error code is quite common and encounters by lots of TP-Link users.

Nevertheless, the TP-Link router error code 5008 is commonly caused by incorrectly, or wrong configured system settings, or it might occur due to uneven entries in the Windows registry. Therefore, the TP-Link router error code 5008 is the letter and number formatting of the error, and it is most commonly utilize error format which employed by the Microsoft Windows and many other Windows compatible software application. Underneath we mentioned some troubleshooting steps for TP-Link error code 5008 without creating any problem or glitches.

Causes of TP-Link Router Error Code 5008

 This TP-Link error code 5008 occurred on the screen when there was any malfunction in the system operation. There are several other causes behind the occurrence of error code 5008 such as wrong or failed installation, uninstallation of software that might have left some invalid entries in the Windows registry, virus or malware infection spread on the computer system, due to improper system shutdown or due to some power failure or includes many other reasons.

Solutions to Troubleshoot TP-Link Router Error Code 5008

Before start following the process, remember that steps might be little tricky or time-consuming but if you follow these steps in the ascending order will save lots of time and efforts. Here how to do it:

Manual Fix for TP-Link Router Error Code 5008

  1. Firstly, click on the ‘Log in’ tab to log in as an admin.
  2. Then, press the ‘Get Started’ tab.
  3. Tap on ‘All Programs’ option.
  4. In the All Programs section, click on the ‘Accessories’ option.
  5. Now, tap on the ‘System Tools’ option.
  6. Under the ‘System Tools’ click on the ‘System Restore’ option.
  7. After that, in the new screen, choose the ‘Restore my machine to an earlier date.’
  8. Once clicked, press the ‘Next’ tab to proceed further.
  9. Next, choose the newest restore date within the ‘Click a Restore Point’ listing.
  10. Once done, again click on the ‘Next’ tab for going further.
  11. Press the ‘Next’ tab appears in the verification window.
  12. Finally, restart your computer system to apply all the changes.

Automatic Fix for TP-Link Router Error Code 5008

  1. Initially, download and install the TP-Link Router Error Code 5008 repair tool on your system.
  2. Click on the ‘Install’ tab to successfully install the repair tool in the system.
  3. Press the ‘Scan’ tab to perform a full system scan.
  4. Once the repair tool identifies the problem, press the ‘Fix Error’ tab to fix the error.
  5. At last, reboot your computer system.
Eleanor  is a jack of all trades : an experienced IT technicians, writer, researcher, and a self-professed Software expert. As a single software engineer, she has in-depth knowledge of Webroot Antivirus  and she likes to write tutorials, reviews, news, and reports about the same under webroot support
Read more…

At present, Epson is one of the largest manufacturers of printers and many other imaging equipment across the country. It is a Japanese electronics company which designed various models of printers and sold them at affordable rates to their users.

Moreover, it provides high-quality printers which are especially popular for printing high-quality images, text and other things which users want to print. Well, Epson is used by millions of users across the country. As all electronics devices someday somehow throw an error code which cannot be solved without technical knowledge.

Though, these errors are quite standard and easily solved by following some simple steps or solutions. Out of all the error, one such error is Epson Printer Error Code 0xF3.

Nevertheless, the Epson Printer error code0xF3 signifies that it’s a fault or malfunction code which usually caused by some errors reported by the driver itself. Thus, the reason for the occurrence of the error could be some software issue or compatibility issue among the system and hardware is being used.

Typically, whenever the operating system and installed drivers are not compatible with each other, then printer throws an alpha-numeric error code such as 0XF3. Here we provide some best and reliable solutions for fixing the Epson printer error code 0xF3. These steps are quite simple and easily utilize by users.

Causes of Epson Printer Error Code 0xF3

Underneath are some causes of the error code 0xF3:

  • When some pieces of paper might get jammed between the gears of the paper feed.
  • A paper stuck inside the paper tray might cause this issue.
  • It occurs due to stuck or removed ink vacuum tubes in Epson printer.
  • Many times, due to some internal conflicts inside the printer causes the issue.

Steps to Troubleshoot Epson Printer Error Code 0xF3

Below we listed some possible and best steps which resolve the Epson printer error code 0xF3. But we suggest you follow all the steps in the right order as mentioned below. Know how to troubleshoot it:

  1. Firstly, Power of the Epson printer and carefully remove the ink cartridges from the printer.
  2. Also, remove the rear element and Windows system.
  3. Gently remove the printer’s ink lever from the printer.
  4. Then, detach the front panel screws away from the printer. And also remove the screws located on the back panel.
  5. After that, with the dry cotton cloth clean the interior of the printer. Doing this will help you in clearing the dust gathered inside the printer.
  6. Once the process is completed, put in the cartridges back to the particular places and entirely reset the printer.
  7. Make a print test by inserting the paper in the paper tray.

Author Bio : Shery Williams is an employee at a top email service provider company in the day, and a technical writer at night. She is passionate about writing troubleshooting tips, beginner’s guides,  Epson printer support and other articles on varied topics.

Read more…

A printer is an electronic device which helps us in transferring the data by pasting it into a text format in the A4 paper sheets with the help of ink. As an electronic device, the printer provides several features in one device such as photocopy, scanning, printing and many others. Due to increase in demand and highly used device in home and offices, many printer companies are manufacturing different models of the printers at low cost or reasonable prices which can be affordable by anyone with lots of amazing features. Canon is also one of the leading company who offers printers, cameras, computer equipment, and many others. It has specialization in manufacturing top quality printers with excellent features and sells them across the globe. Due to top-notch quality prints, it is known among millions of users. However, due to lots of advanced features and continues, usage users encounter some common bugs, therefore, one such is Canon printer error code ‘E02’.


The Canon printer error code ‘E02’ is one of the most ordinary errors which is experienced by many Canon printer users. Well, you don’t need to worry, if you are facing the same error, i.e. Canon printer error code ‘E02’. Though, it is the technical bug and arises due to some problem in the print head. However, this Canon printer error code ‘E02’ occurs due to overheating issue in the print head.  Sometimes, this error occurs whenever the printer is out of paper or when the paper sheet is not properly placed in the printer. Learn how to resolve Canon printer error code ‘E02’ without facing any other hurdle, just by following a few simple steps. The steps are illustrated below.

Ways to Resolve Canon Printer Error Code ‘E02’

There are many solutions to resolve Canon printer error code ‘E02’ over the internet. But below we provide you best and effective solution which surely troubleshoot the error. Sometimes, these steps are more difficult and much time-consuming, if you follow them in ascending order will make steps easy and simple and troubleshoot an error in a jiffy. Here how to do it:

Method-1: Check the Cartridges

  1. Press and hold the ‘Power’ tab located on the printer to turn it off.
  2. After that, carefully open the ‘Print Head’ of the printer.
  3. Again, long press the ‘Power’ button and turn on the printer.
  4. After you turned on the printer, cartridges will automatically start moving to the left side. Therefore, before the cartridges reach the left side of the printer, you need to close the printer cover and left the printer in the ‘Turned On’ mode.

Method-2: Reseat the Print Head

To reseat the print head, follow the steps mentioned below:

  1. You need to turn off the printer and leave it turned off for at least 60 seconds.
  2. Again, turn on the printer by pressing the ‘On/Off’ tab and check if the error fixed or not. If not, follow the next method.

Method-3: Clean the Print Head

For troubleshooting the issue, sometimes, cleaning the print head helps in fixing the problem. Here how to do it:

  1. Firstly, carefully clean and remove the print head.
  2. You can simply clean the print heads with the use of connectors with some tips and alcohol.
  3. Now, before turning on the printer, make sure that the connector you are using is completely dry and clean.
  4. After that, continuously press the ‘On/Off’ tab to start the reboot mode on the printer.

After following methods the steps above you will be able to troubleshoot the Canon printer error code ‘E02’.

Source By : Hp printer support number

Read more…

How to troubleshoot HP Printer Error 57.xx?

HP is a provider of various devices which help the individuals and assist the users in their daily work. There are various advantages of the devices provided bythe organization and while using the device, it can happen that the individuals might face some kind of issue in the device which can hamper the work.

HP provides a variety of devices such as a printer, laptop, PC, scanner and much more. HP is known to offer a series of powerful and unique printers which helps them in carrying out their work in the daily routine. While using the device, it can happen that the individuals might face HP Printer Error 57.xx which can create many problems in the printer and it can also damage the internal features of the device.

It is significant for the individuals to perform the activity with proper guidance so that the issue can be resolved very easily and it can also help the individuals to use all the features which assist the individuals in the process to Fix HP Printer Error 57.xx.  We suggest individuals follow all the given steps in a proper way so that they can continue with the process and can also continue working with the device in a proper manner.

Some Facts of Hp Printer Error 57.xx                   

Here are the points that would help you know which kind of error you are facing in your HP Printer. Once you understand what errors or issues your printer is facing, you can start with the steps to solve that error.

  • When a printer error persists i.e. 57.01, it means cartridge fan error is being faced.
  • In times of 57.03, it is an error of the power supply fan.
  • While facing 57.04, you must be facing a controller fan error.
  • While 57.05, you can recognize that it is the delivery fan error.
  • If your printer shows 57.06, it means face-down bin error is moving your device.
  • In 57.07, you need to check the delivery fan.
  • If the device shows 57.08, it is an indication for duplexer fan error.

There are some of the numbers and errors that would help you to understand what are the exact issue faced in the printer. Once you are ensure about the error, you can jump to solving that error by following the steps which have been listed below.

Steps for HP Printer Error Code 57.xx Solution

  • To start with the process to fix HP Printer Error 57.xx, you need to ensure that the connector on the dc controller is firmly seated.
  • After that, you need to ensure that the connector on the intermediate connector and dc controller are firmly seated.
  • After that, you must ensure that the connector on the dc controller is firmly seated.
  • Now, you must check the connectors at the rear or front fan.
  • You also need to ensure that the fan blades can move freely.
  • After that, you must listen for the fans to operate while the device is modifying.
  • In case, the fan does not operate during the initialization sequence, you must replace it.
  • You can also go with changing the entire duplexer assembly for a failed duplexer fan.

So, these are some of the steps that would help the individuals in the process and they would also offer you with HP Printer Error Code 57.xx Solution. All the steps are unique and they also provide complete solutions for the problems and issues related to the 57.xx errors. If by following the above-given steps the error is not resolved, then feel free to contact HP printer customer support number.

Alexander Paul is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cybersecurity, malware, social engineering, Games,internet and new media. He writes for Printer support at HP Printer Support.

Source: 3819321833?profile=original

Read more…

If the error 1935 persists during the installation of assembly component when you install Office 2007 or 2010, one of the Office stand-alone products like Ms office, Excel, restart the PC and try to run the setup again as a quick first step. If the error still appears after restarting the system, try these methods to troubleshoot the issue.

Run the System Update Readiness tool

Repair or update Microsoft .NET Framework components

Firstly, Install the programs and check whether the latest version of the .NET Framework is installed. To do this, the steps are hereby described below:

  • Click on Start > Run in Windows XP
  • Type appwiz.cpl, and then have a click on Enter.
  • Look for Microsoft .NET Framework in the list of installed programs.

If you find Microsoft .NET Framework for the Profile of client, follow these steps to repair it:

  • Close all the applications.
  • Click on Start > Run in Windows XP.
  • Type appwiz.cpl, and then press Enter.
  • Click on Microsoft .NET Framework and then Remove/change or Uninstall/Change in Windows XP.
  • Select the option to Repair .NET Framework to its original state, and then click on Next.
  • When the repair is complete, then click on Finish, and then click on Restart Now to restart the PC.

If you can’t find Microsoft .NET Framework, download and install it to update the PC.

Try to install the Microsoft Office. If error 1935 persists, then follow the steps to uninstall and reinstall .NET Framework from the device.

Uninstall and reinstall Microsoft .NET Framework components

Uninstall and reinstall Microsoft .NET Framework components. To uninstall .NET Framework components from the device follow these steps:

  • Create a junk and temporary folder on your desktop.
  • Visit the .NET framework clean-up tool and download the file.
  • When encouraged, click on Open, and then on Extract Now. Extract the files to the folder which you created.
  • Find cleanup_tool.exe in the folder you created and have double-clicked on it.
  • Do you want to run the .NET Framework Setup Clean-up Utility? Click on Yes.
  • Click on Yes to accept the license agreement.
  • In the Product to clean-up window, select a .NET Framework version that you want to remove.
  • Click on the option of Clean-up now.
  • Restart the device once the .NET Framework component is removed.
  • Download and install the following components, at a time, based on your operating system:
  • .Net Framework 1.1 – For Windows XP.
  • .Net Framework 1.1 SPI– For Windows XP only.
  • .Net Framework 3.5 SPI – For Windows XP, Windows Vista, and Windows 7.
  • .Net Framework 4.0 – For Windows Vista, Windows XP, and Windows
  • Restart the device, and run Windows Update to install updates.

If By following above steps, you are not able to resolve the error. Feel free to contact MS office Customer Support.

Kaylee Smith is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cybersecurity, malware, social engineering, Games,internet and new media. He writes for Ms-Office products at  or .


Read more…

McAfee security offers the most effective and simple means for customers around the world to defend their data and identity. It offers security solutions which stop threats and protect data from the system to cloud using a proactive, intelligence-driven and open approach.

A user may face some mistakes while using McAfee Antivirus in the device. The McAfee antivirus errors are 0 and 12152.

Symptoms of Error 0, 12152:

  • Error 1215 or Error 0 will display on the desktop screen and crashes the active software
  • Windows with start running slowly
  • McAfee error while installing updates
  • Frequent crashes with the same program
  • Freezing of keyboard and mouse time to time


  • Corrupt or incomplete download
  • Corrupt Windows registry
  • Malware infection

Methods for troubleshooting McAfee Error Code 0 and McAfee Error Code 12152:

Repair Register Entries:

Before starting repair your Windows registry, you should keep a backup by exporting registry related to these errors.

  • Go to the start button
  • Enter the command in the search bar, and do not press the Enter button.
  • Press control and shift button, then press the Enter button
  • A dialog box will appear on the display
  • Click on yes button
  • A black box will appear on the display in front of you
  • Type Regedit and press Enter button

In this register editor, choose the errors which are related to error 0 or 12152 for the backup

  • Select the option of Export from the file menu
  • Save those files with .reg extension
  • Now you can have the backup of your registry entry

Full malware scan of your device

You may get these errors due to virus infection. Try a full scan of your device and then restart your device and check whether the errors are solved or not.

 Remove all system junk

Your device may store lots of junk files due to web surfing. If you didn’t clean the junk files, it can slow down your system. Cleaning the temporary or junk files may not resolve your errors but it will definitely speed up your device.

 Update the PC drivers

You can also get these errors due to corrupt or outdated device drivers. But finding and fixing the device drivers is not an easy task and it is quite time-consuming. If you install the wrong device driver, it can upturn your problems.

 Undo the recent changes in the system:

System restore will allow undoing the recent changes. This can also solve your error codes.

  • Go to the start button and enter System Restore in the search box and press Enter button
  • Click on the option of System Restore
  • Enter the admin password
  • Follow the onscreen commands
  • Restore the device

 Install available Updates of Windows

You may get those errors due to outdated updates in windows. Updating the available Windows updates may fix these errors.

  •  Go to the start button and enter an update on the search bar and press the Enter button
  • A dialog box will display with Windows Updates
  • Check for any updates, if available then click on the Install Updates button

 Installation of Windows

If your error still persists with any other solutions then install a new window and again start the device and if then also the issue is not resolved, Call McAfee Customer Support Phone number for help.

Kaylee Smith is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cybersecurity, malware, social engineering, Games,internet and new media. He writes for mcafee products at or . 


Read more…

McAfee Antivirus is one of the established brands in the present scenario that defends your device from the malicious and unwanted attack. In order to fix McAfee Installation Error 7305, there is an issue that appears during the installation of the program/software. Whenever this kind of issue occurs, at that time you make take immediate support from our expert and talented technical experts that takes your issue in their concern and offer you the best possible output in very less time.

Reasons for McAfee Installation error code 7305?

The McAfee error code 7305 means that an issue with McAfee download server’s likely to cause your download to fail.

  • Incomplete installation of McAfee Antivirus software.
  • Download Corruption of McAfee software.
  • Corruption in entries of Windows registry.
  • Virus that has corrupted the programs of Windows system.
  • McAfee anti-virus software related files deleted mistakenly by software maliciously.

Methods to Fix McAfee Antivirus Installation Error 7305

We have provided two different methods for the use of the individual to resolve McAfee Installation Error 7305. Both methods are effective and offer instant resolutions.

Method 1: Download MCPR Tool

  • Firstly, you need to download the MCPR tool on your device.
  • After that, Download the tool and open your browser and then visit the official website
  • Once done, Click on the Download button and then save the file on your device.
  • Now, have a double click on the file to run the setup after it is downloaded.
  • As the installation starts, click on the Yes button to allow the program to make changes on your device.
  • After that, click on the Agree button to accept all the terms and conditions and then continue further.
  • Now, have a click on the Next button after entering the Captcha image.
  • Once the procedure is finished, restart your device to save the changes.

Method 2: Pre-Install Tool

  • Firstly, Download the Pre-install Tool from the website of
  • Save the file on your system and then have a double click on the Pre-Install_Tool.exe file to run the setup.
  • After that, click on the “Yes button” to continue and then click on the OK to accept the terms and conditions.
  • As the Pre-Install finishes the scan then you must click on the Ok and then Click on the Close button to close it.
  • At last, restart your system to save the changes to your system.

McAfee Help! Contact Us at McAfee Customer Support

If the issue is not resolved by following the above methods, you may directly contact us at our McAfee technical support phone number which is available 24/7 or 365 days round the clock at any hour of the day which has very perfect technical issues with the complete excellence to resolve all your issues related to Error code 7305. We are very consistent service providers if you compare it with others. We also have the facility of McAfee live support directly from your device.

Kaylee Smith is a self-professed security expert; he has been making the people aware of the security threats. His passion is to write about Cybersecurity, malware, social engineering, Games,internet and new media. He writes for mcafee products at and


Read more…