Bluetooth is a remote innovation that gives a ‘without wire’ experience and enables you to connect to other devices.

On the off chance that you use Bluetooth on your system regularly, you may have encountered situations where pairing your device and the PC takes a lot of time to finish. Thus, Swift Pair is the right tool for you to make the process simple.

What is Bluetooth Swift Pair?

Bluetooth Swift Pair was introduced with the Windows 10, 2018 update. It was launched to give you a smooth and better experience while working with Bluetooth. The active mode of Bluetooth pairing takes very little time to begin working.

6195567061?profile=RESIZE_710x

A drawback of using Bluetooth Swift Pair is that it comes handy with some specific devices and doesn’t work with all of them.

How to enable Bluetooth Swift Pair on Windows 10?

The earlier addition of Bluetooth Swift Pair wasn’t enabled by default on Windows 10, thus it had to be activated manually. The changes can be made from the ‘Settings’ app, and the steps to do so are as mentioned below:

  1. Go to the ‘Start’ menu and type ‘Settings’ to open the settings app in the search bar.
  2. From the list of options that appear on the window, select ‘Devices.’
  3. Tap on the ‘Bluetooth and other devices’ option from the toolbar present at the left side of the screen.
  4. Tap on the checkbox for ‘Show notifications to connect using Swift Pair’ to enable the same.

Once you’re done enabling the Bluetooth Swift Pair, you’ll be able to connect to your Bluetooth devices directly.

A guide to using Bluetooth Swift Pair on Windows 10?

The steps to use or pair a Bluetooth device with Windows 10 are:

  1. Enable the Bluetooth Swift Pair on your PC. On the other hand, turn on the pairing mode for the Bluetooth device that you want to connect.
  2. Place the Bluetooth device near your system to set them up.
  3. Windows will present a pop-up window asking you for permission to connect to the particular device. You can either connect or dismiss.
  4. Once you click on the ‘Connect’ button, it will pair with your PC.

Note: Some devices have an external button present on the Bluetooth device that needs to be pressed and held for a few seconds to start pairing.

How to disable a Bluetooth Swift Pair on Windows 10?

In case you want to disable the Bluetooth Swift Pair to work, you can follow the steps mentioned below:

  1. Go to the ‘Start’ menu and type ‘Settings’ in the search bar to open the settings app.
  2. From the list of options that appear on the window, select ‘Devices.’
  3. Tap on the ‘Bluetooth and other devices’ option from the toolbar present at the left side of the screen.
  4. Tap on the checkbox for ‘Show notifications to connect using Swift Pair’ to disable the same by removing the check mark.

source :-https://redtopix.com/blog/how-to-use-swift-pair-on-windows-10-to-pair-bluetooth-devices/

E-mail me when people leave their comments –

You need to be a member of The Brooklynne Networks to add comments!