How to install a Linksys range extender?

We use wireless range extenders to increase the range of our existing Wi-Fi router throughout our home. Linksys is manufacturing wireless range extenders from quite a while and do it perfectly. But, to use a Linksys range extender, we should know, how to set it up with our existing home Wi-Fi router. Setting up the Linksys range extender is very easy and quick. It does not take much time to setup the Linksys range extender. There are several ways by which we could setup the Linksys range extender. We would discuss each of them one by one.

# Things to keep in mind before setting up the Linksys range extender

There are certain things which we should always keep in our minds before setting up the Linksys range extender. As we know, the Linksys range extender is an easy plug and play device but, we should always reset the Linksys range extender before setting it up. Resetting the Linksys range extender makes it to come back in its factory default which makes easy to set it up. The other thing which we have to do before setting up the Linksys range extender is to place it in the same room as our home Wi-Fi router.

# Wireless setup

We have to plug in the Linksys range extender and power it on. Then, we have to go to or computer or laptop and we have to connect with the Linksys range extender. Once connected, we have to open any web browser on or computer and we have to put www.extnder.linksys.com at the address bar of the browser. After putting www.extnder.linksys.com, we have to search it. After searching, we would be on the setup page of Linksys range extender. We just have to follow few instructions which will come on computer screen.

# Hardwired setup

We could also setup the Linksys range extender by connection it to our laptop or computer directly with the help of an Ethernet cable. Once connected like this, we have to open any web browser on our computer and we have to put the default IP address of the Linksys range extender on the address bar of the web browser and search it. After searching it, we have to put ‘admin’ as our username as well as the password. After that, we just have to follow few instructions and after that, the Linksys range extender will start working.

Views: 1

Comment

You need to be a member of The Brooklynne Networks to add comments!

Join The Brooklynne Networks

Brooklynne.net- Financial Services for Businesses and Professionals

© 2019   Created by Brooklynne Networks.   Powered by

Badges  |  Report an Issue  |  Terms of Service

tag.