When your system is verified with an encoded secret key, you can expand security by limiting access to your system to a lot of gadgets on the Wireless Card Access List. When you empower the Access List, remote gadgets that are not on the rundown won't be permitted to join your remote system.


Note : This article portrays the setup of the entrance control highlight on more established NETGEAR remote switches. For more current switches with the genie UI, see Configure Access Control/MAC Filtering utilizing genie


  • To design Access Control or MAC sifting with mywifiext.net Smart Wizard:


  • Utilize an Ethernet link to associate a PC to any of the four LAN ports of the NETGEAR switch.


  • In an internet browser type in the set up link that is mywifiext.net, if it does not load up them, enter the switch IP address, either or as a matter of course.


  • In the event that these IP addresses are not working, perceive How would I login to my NETGEAR home switch?


  • At the point when prompted by mywifiext.net for a username and secret phrase, enter the username and secret key. The default username and secret phrase are administrator and password, individually.


  • net prescribes changing the default secret word to expand the security of your system.


  • In the mywifiext.net from the primary menu on the left, select Advanced > Wireless Settings.


  • Now the mywifiext.net will take you to the next page, over there, Snap Setup Access List to open the Wireless Card Access List.


  • In the event that the gadget that you need to permit to interface remotely is recorded, select it and snap Add.


  • In the event that the gadget that you need to permit to associate remotely isn't recorded, you can include it physically.


You should realize the MAC address, perceive How to discover a PC's MAC Address


  • Snap Add. Enter an engaging name for the PC into the Device Name field and enter the PC's MAC address into the MAC Address field, at that point click Add.


Now in the mywifiext.net link repeat these means to add all endorsed remote customers to the permitted rundown.


When you have finished including all the remote MAC delivers permitted to interface with remotely with your switch, select Turn Access Control On.


Snap Apply. Your settings are spared and just the remote customers with MAC tends to recorded will be permitted to associate with your switch.


Note: If you have to associate another remote gadget to the switch, you should initially include its MAC address the rundown.


E-mail me when people leave their comments –

You need to be a member of The Brooklynne Networks to add comments!

Join The Brooklynne Networks