The vibration of the crusher's crushing plate not only aggravates the degree of wear of components such as moving parts, but also may cause the production to fail. The following is an analysis of the phenomenon of the crushing of the crusher of the Stone Crushing Equipment from two aspects: the cause and the solution:

The reason why the crusher crushing plate shakes

After analysis, there are two main possibilities…

The sand making machine is a special ore processing machinery equipment for sand and gravel production. The sand making machine can process the ore into sand and gravel. It is an important ore processing machinery and equipment. For the large ore processing machinery and equipment of sand making machine, sand making The bearing of the machine is a very important part. Here, Shanghai ZENITH Xiaobian and everyone talk about the problems in the…

maintenance of dry powder mixer

The sand making machine manufacturers explain the daily maintenance of the dry powder mixer. The dry powder mixer is not suitable for selection. The mixing is not uniform and the cracks are easily formed. For example, if the vertical dry powder inclusion machine or the special dry powder inclusion machine is used, the location of cement or ash and calcium will crack. Because the manufacturer of the putty powder…

The Hammer Crusher is mostly used for primary crushing, and the feed size is 600-1800mm. The hammer is mainly used for high-speed rotary motion to crush the material, and the vibration during operation is large, which directly leads to frequent failure of the crusher. There are four main types of common hammer crusher failures: 1. bearing wear; 2. bearing overheating; 3. knocking sound inside the…